Happ Competition Pushbutton with Horizontal Microswitch

New, longer-style Happ convex plunger pushbutton. Fits standard 1.125" hole, includes E-Switch microswitch with .187" terminals, and black nylon mounting nut.

$2.00/each *SALE* $1.70/each

New, longer-style Happ concave plunger pushbutton. Fits standard 1.125" hole, includes E-Switch microswitch with .187" terminals, and black nylon mounting nut.

$2.50/each *SALE* $1.95/each

Happ Pushbutton with Horizontal Microswitch

New, longer-style Happ concave plunger pushbutton. Fits standard 1.125" hole, includes E-Switch microswitch with .187" terminals, and black nylon mounting nut.

$2.00/each *SALE* $1.55/each

IL Translucent Pushbutton with Horizontal Microswitch

Virtually identical to the Happ buttons above, but translucent. These are actually made in the same molds that IL used to use when they made Happ's buttons. They look great when illuminated from below. Fits standard 1.125" hole, includes Cherry microswitch with .187" terminals, and black nylon mounting nut.

$3.95 *SALE* $2.95

Classic concave design, virtually identical to the Happ white player imprints sold above... Fits standard 1.125" hole, includes Cherry microswitch with .187" terminals, and black nylon mounting nut.

$2.50/each

Sanwa OBSF-30 Pushbutton

MAD CATZ SE FIGHTSTICK COMPATIBLE!!

These are some of the smoothest, quietest pushbuttons your are likely to encounter. OEM on many Japanese cabinets, these low-profile buttons are strictly for metal control panels only, they just snap right in. The vertical microswitch has .110" lugs. Buttons are 30mm in diameter. PLEASE NOTE: For the black-rimmed buttons, they show in the drop-down box as : "black/color". If you do not see it in the drop-down box, we are currently out of stock...

$2.95/each

Same as OBSF-30, but threaded and including mounting nut.

$2.95/each

Sanwa OBSF-24 Pushbutton

These are some of the smoothest, quietest pushbuttons your are likely to encounter. OEM on many Japanese fighting games and controllers as start/select buttons, they are low-profile and strictly for metal control panels only, they just snap right in. The vertical microswitch has .110" lugs. Buttons are 24mm in diameter.

$2.50/each

Same as OBSF-24, but threaded and including mounting nut.

$2.50/each

When 18mm is too small, and 24mm is just too big, there's the SDM-20, a 20mm momentary-contact pushbutton with .110" contacts. Made in Japan by Shinden for Sanwa. Body and plungers have a matte finish.

$2.50/each

Use these high-quality buttons for your test and service switches. They snap in just like the larger Sanwa buttons. Requires an 18mm hole, .110" contacts. Momentary contact. Manufactured in Japan by Shinden for Sanwa.

$2.50/each

Seimitsu PS-14-K 30mm Pushbutton

We have a limited supply of these now discontinued snap-in translucent pushbuttons with a vertical microswitch. 30mm in diameter, with .110" lugs... Once they are gone, they are gone...

$4.95/each

Seimitsu PS-14-KN 30mm Pushbutton

Seimitsu has discontinued their coveted "skeleton" pushbuttons, and replaced them with these... Threaded translucent pushbuttons with a vertical microswitch. 30mm in diameter, with .110" lugs and clear nuts (the buttons in the pictures are sitting on them!).

$3.95/each

Seimitsu PS-15 30mm Pushbutton

Similar to the Sanwa OBSF series, except much shorter, this is a 30mm snap-in Japanese pushbutton with vertical microswitch. The switch has .110" lugs.

$2.50/each

Seimitsu PS-14-GN 30mm Pushbutton

Threaded 30mm Japanese pushbutton with vertical microswitch. Includes mounting nut. The switch has .110" lugs. There are 3 different varieties of this button, with the same part number, so we have them broken down into sections to make ordering a little bit easier...

30mm Solid Colors

$2.95/each

30mm Black Body with Colored Plunger

$2.95/each

30mm Colored Body with Clear Plunger

$3.50/each

Seimitsu PS-14-DN 24mm Pushbutton

Threaded 24mm Japanese pushbutton with vertical microswitch. Includes mounting nut. The switch has .110" lugs. There are 3 different varieties of this button, with the same part number, so we have them broken down into sections to make ordering a little bit easier...

24mm Solid Colors

$2.50/each

24mm Black Body with Colored Plunger

$2.50/each

24mm Colored Body with Clear Plunger

$2.95/each

Seimitsu PS-14-D 24mm Pushbutton

This is a 24mm snap-in switch with a flat top. The switch has .110" lugs.

$2.50/each

Happ Hole Plug

Happ part # 52-6212-00, your standard hole plug for 1 1/8" holes.

$1.20/each

Sanwa OBSM Series 24/30mm Hole Plug

Plug up those empty holes with these nice button plugs, they snap right in your metal control panel. Available in 24mm and 30mm. Not recommended for use with wood control panels.

$1.75/each

Yenox Hole Plug

Plug up those empty holes in your metal or wood control panel with these. Standard 30mm/1.125" diameter.

$.95/each

Happ Pushbutton Wrench

Stop busting your knuckles inside that control panel and use this handy tool to tighten up the nuts on the bottom of your pushbuttons! Happ part # 53-8002-00, manufactured in Spain by IL. Use one end for illuminated buttons, the other for standard pushbuttons. Will not work with Yenox buttons. This is also listed in the Sanwa catalog as part # K-OBSA, but doesn't really work that well with Sanwa pushbuttons...

$2.25/each *SALE* $1.95/each

Yenox Player Imprint Pushbutton with Horizontal Microswitch

A bit shorter than the Happ button, and slightly less concave. Imprinted with P1 or P2, in white and black. Fits standard 1.125" hole, includes Yenox microswitch with .187" terminals, and black nylon mounting nut. A decent, inexpensive button, slightly "tighter" than Happ's, and half the price!

$1.50/each

Yenox Pushbutton with Horizontal Microswitch

A bit shorter than the Happ button, and slightly less concave. Fits standard 1.125" hole, includes Yenox microswitch with .187" terminals, and black nylon mounting nut. A decent, inexpensive button, slightly "tighter" than Happ's, and half the price!

$1.25/each

Translucent Pushbutton with Horizontal Microswitch

A bit shorter than the Happ button, and convex. Fits standard 1.125" hole, includes microswitch with .187" terminals, and black nylon mounting nut. Generic brand, made in China.

$2.95 *SALE* $1.95

Test/Service Switch

These little single pole/single throw switches work great for test/service/credit buttons. Momentary contact, 5/16" in diameter.

$.95/each

Wico NOS Short Leafswitch Pushbutton

Short leaf-switch buttons are ideal replacements for your old metal control panel! Holders and Pal nuts sold below. Please note: leafswitch style pushbuttons are becoming more and more scarce, so don't go crazy and order 50 of something without checking with us first!

$2.00/each

Wico NOS Short Translucent Leafswitch Pushbutton

Short leaf-switch buttons are ideal replacements for your old metal control panel! Holders and Pal nuts sold below. Please note: leafswitch style pushbuttons are becoming more and more scarce, so don't go crazy and order 50 of something without checking with us first!

Wico NOS Long Leafswitch Pushbutton

Long leaf-switch buttons are ideal replacements for your old wood control panel! Holders and Pal nuts sold below. Please note: leafswitch style pushbuttons are becoming more and more scarce, so don't go crazy and order 50 of something without checking with us first!

$2.00/each

Wico NOS Long Translucent Leafswitch Pushbutton

Long leaf-switch buttons are ideal replacements for your old wood control panel! Holders and Pal nuts sold below. Please note: leafswitch style pushbuttons are becoming more and more scarce, so don't go crazy and order 50 of something without checking with us first!

$2.50/each

Ideal for use with wood control panels and long buttons, perfect fit. Includes leafswitch with .187" terminals.

$3.50/each

For use with metal control panels and short buttons only, perfect fit. Includes leafswitch with .187" terminals.

$3.50/each

For use with metal control panels and short buttons only, perfect fit. Includes leafswitch with .187" terminals. May need to be cleaned! LIMITED QUANTITIES AVAILABLE!!

$3.50/each

Nintendo Pushbutton Holder USED

For use with metal control panels and short buttons only, requires 2 spacers (not included) for proper fit. Includes adjustable microswitch with .187" terminals. May need to be desoldered!
EXTREMELY LIMITED QUANTITIES AVAILABLE!!

$4.00/each

Wico NOS PAL Nuts

For use with leafswitch buttons. Don't forget your nuts!

$.25/each