Toodles Chimp Board - *NEW*

The new Chimp board combines a PS3/PC Cthulhu with an Imp switch on one board. Chimps are designed to be soldered to a common ground Xbox 360 pad. Once all of the proper connections are made, your arcade stick will work on a PS3 or Xbox 360 over a single USB cable. Please be aware that assembling and installing a Chimp into a stick alongside an Xbox 360 pad is a very technical process and requires a heavy amount of soldering. This board is for very experienced arcade stick modders only, and no support is available at this low price.

Additional Features:

- Console auto-detection. No more switches or holding down buttons. When the Chimp sees it is plugged into an Xbox 360 console, control is seamlessly handed over to the Xbox 360 pad, meaning you can just plug in and go on either console or PC.

- Trigger inversion. No more inverters or transistor hacks. If the Xbox 360 PCB requires the triggers to be inverted, simply connect the triggers to 3K_Invert and 4K_Invert lines on the Chimp so it can do the hard work for you.

The assembled board is available in 2 versions: both include screw-down terminals, and are available with our without USB jacks: The Chimp assembled without USB Jack is best for use in modifying store bought sticks, and is perfect for modding the Madcatz Fightstick; The Chimp assembled with USB jack is best for use in wooden arcade stick cases. The Chimp Kit does not include screw-down terminals, they are sold seperately below...

For more in-depth info on this, as well as other Toodles boards, check out his thread on Shoryuken.com by clicking here.

Toodles Cthulhu PC/PS3 Board

Assembled Cthulhu PC/PS3 Board. The assembled Cthulhu board is the first completely solderless board for your arcade stick. Every connection to buttons or directions screw in directly to the side of the board, so installation requires nothing more than a screwdriver. The Cthulhu board works on any PC (including Mac, Windows Vista/XP/2K/98, and Linux) as well as Playstation 3 systems INCLUDING full backwards compatability with PS2 and PS1 games on all Playstation 3 models that support BC games; all without any drivers to install.

Features include:

- 20 screw terminals for connecting all of the wires going to your buttons and directions, including a VCC line to power your Perfect360, Sanwa Flash, or Suzo Inductive powered sticks, and/or various LED modifications (not includied), and four connected Ground terminals to make connecting your ground loops super easy and clean.

- USB 'B' jack so you can plug in a standard USB cable of any length or color to match your stick.

- Separate connection points for all power lines and signals to make installation along side a common ground Xbox360 pad as painless as possible. Please be aware, this is still a very difficult modification to do for any board, but the Cthulhu makes it as painless as possible.

-Four mounting holes at corners for easy installation inside your stick.

-Ability to make the Start and Select buttons activate the PS3 in game menu, so you have one less button to install in your stick.

The Multi-Console version supports PS1/2/3, Xbox(1), and Gamecube...

For more in-depth info on this, as well as other Toodles boards, check out his thread on Shoryuken.com by clicking here.

Toodles AXISdapter

The AXISdapter allows for easy installation of a wireless Playstation 3 controller into your arcade stick without the difficulty of fine soldering.

Installing an AXISdapter is simple; open up your wireless Sony brand Playstation 3 controller, remove the plastic film from the main board, slide in the included ribbon, and slide the AXISdapter onto the other end of the ribbon cable. Now, all of your wiring for stick and button can be easily inserted to the screw terminals in a manner of minutes.

Note: The AXISdapter is currently known to work with all models of SIXAXIS controllers, and most versions of the DualShock 3 controller. There do exist models of the DualShock 3 controller that do not use the same ribbon cable as the AXISdapter expects. To check if yours will work, disassemble the controller and check if the plastic membrane slides into a connector on the board, or if it is just pressed against the board. If it uses a sliding connector, it will work with the AXISdapter. All known models of SIXAXIS use the proper connector, so please look for a SIXAXIS if you intend to purchase a controller for this purpose.

$19.95 AXISdapter Kit

$24.95 AXISdapter Assembled

Toodles Imp Board

This little board allows 2 PCB's to share the same USB cable, and is a nice addition to a multi-console set-up, as it acts as a switch. Recommended for advanced users only...

$8.95 Imp Kit

$10.95 Imp Assembled

Neutrik NAUSB-W A/B USB Feed-Through, Silver

Use this A/B adapter to put a USB port on the outside of your case... USB "A" on one side, USB "B" on the other, reversible so you decide which port is on the inside, and which is on the outside...

$7.95

Neutrik NAUSB-W-B A/B USB Feed-Through, Black

Use this A/B adapter to put a USB port on the outside of your case... USB "A" on one side, USB "B" on the other, reversible so you decide which port is on the inside, and which is on the outside...

$7.95

Belkin USB A/B Cable, 6-inch

Perfect size cable to hook your Cthulhu to a Neutrik adapter, dark grey.

$4.95

Neutrik NE8FDP RJ45 Feed-Through, Silver

Use this RJ45 adapter to put an ethernet port on the outside of your case...

$9.95

Neutrik NE8FDP-B RJ45 Feed-Through, Black

Use this RJ45 adapter to put an ethernet port on the outside of your case...

$9.95

Vertical Multi-Jamma PCB, 60-in-1

This is the latest and greatest version of the popular Multi-Jamma board. They've doubled-up on the Pac games so you can have "fast" and a "regular" speed versions in the menu, and they've added 5 more games. This board also supports dual track-balls, so you can finally put track balls on your cocktail table! NOTE: DUE TO THE OVERWHELMING DEMAND FOR THIS ITEM, PLEASE ALLOW 3-5 DAYS FOR YOUR ORDER TO SHIP!!

60-in-1 $149.95

Horizontal Multi-Jamma PCB, 19-in-1

Horizontal goodness is back! Here's a multi-game solution for cabinets with horizontal monitors... NOTE: DUE TO THE OVERWHELMING DEMAND FOR THIS ITEM, PLEASE ALLOW 3-5 DAYS FOR YOUR ORDER TO SHIP!!

19-in-1 $299.95

Multi-Pac Board Kit, 24-in-1

The 24-in-1 Multi-Pac kit converts an original Ms. Pac Man, Pac Man or Pac Man Plus board set into a menu-selectable 24-game machine. The kit installs onto the main motherboard into the existing sockets and requires no soldering or special tools to install. A full installation and troubleshooting manual is included. Games are selected from a menu using the joystick and player one start button. The menu is displayed when the game is powered up or on reset. A built-in menu recall feature allows the player to recall the menu at any time by pressing the player one and two start buttons at the same time. Please click on the picture to the left for more pics and a game list.

$150.00

EXTREMELY LIMITED QUANTITIES AVAILABLE!!

SNK Neo-Geo 1-Slot Jamma PCB MV-1C

New, top-loading Neo Geo board, includes manual.

$195.00

20 Pin Edge Connector

10 x 2, solder-style. For DIY harnesses & jamma adapters.

$2.95

36 Pin Edge Connector

18 x 2, solder-style. For DIY harnesses & jamma adapters.

$3.95

44 Pin Edge Connector

22 x 2, solder-style. For DIY harnesses & jamma adapters. Fits Nintendo.

$3.95

56 Pin Edge Connector

28 x 2, solder-style. For DIY jamma harnesses.

$3.95

72 Pin Edge Connector

36 x 2, solder-style. For DIY harnesses & jamma adapters.

$4.95

New PCB Feet

Screw your board down tight with a set of these. Set of 4.

$2.95

New Long PCB Feet

Includes a spacer for those sets with 2 boards screwed together.

$.95/each

TEMPORARILY OUT OF STOCK!!

Lizard Lick Jamma PCB to Pac Cabinet Adapter

Finally, a simple solution for adding a multi-jamma board to your working Pac cabinet... Made exclusively for Lizard Lick, this board plugs right into your existing wiring harness, and your pcb plugs into it. That's it, no power supply needed, no need to hack up the wiring in your cabinet. Adapter has .156" headers for 3 buttons for each player. For original, working 80's Ms. Pacman or Pacman cabinets only, and designed more or less for the multi-jamma boards sold above.

$59.95

New Jamma PCB to Galaga Cabinet Adapter

Allows you to use a jamma pcb in your Galaga cabinet. Includes connectors for the existing 3 and 6 pin Molex connectors. Can also be used for Gaplus, Galaga 3 and Bosconian...

$24.95

sold out!

New Jamma PCB to Konami & Stern Cabinet Adapter

Allows you to use a jamma pcb in your Konami or Stern cabinet. Includes connectors for additional buttons.

$24.95

TEMPORARILY OUT OF STOCK!!

New Jamma PCB to Pac Man & Ms. Pac Man Cabinet Adapter

Allows you to use a jamma pcb in your Pac or Ms. Pac cabinet. Includes connectors for additional buttons. A switching power supply is required.

$24.95

New Galaga, Gaplus & Galaga 3 PCB to Jamma Cabinet Adapter

Allows you to use a Galaga pcb and others in your Jamma cabinet.

$24.95

New Galaxian PCB to Jamma Cabinet Adapter

Allows you to use a Galaxian pcb in your Jamma cabinet.

$24.95

New Gallag PCB to Jamma Cabinet Adapter

Allows you to use a Gallag pcb in your Jamma cabinet.

$24.95

New Konami PCB to Jamma Cabinet Adapter

Allows you to use a Konami pcb in your Jamma cabinet.

$24.95

New Mr. Do PCB to Jamma Cabinet Adapter with Sound Amplifier

Allows you to use a Mr. Do pcb in your Jamma cabinet. Includes built-in sound amp.

$29.95

New Pac Man & Ms. Pac Man to Jamma Cabinet Adapter

Allows you to use a Pac Man or Ms. Pac Man pcb in your Jamma cabinet.

$24.95

TEMPORARILY OUT OF STOCK